Door Hardware
|
Heavy Door Pulls (DOPU & DOPUW) Packaging: Boxed / Bagged with screws Material(s): Hot-rolled steel Finish(es): Hot-dipped Galvanized (DOPU) or White (DOPUW) finish. |
 |
|
Slide Bolt Latches (SLLA) Packaging: V-Packed Material(s): Cold-rolled steel case and strike; steel rod bar. Finish(es): Zinc plated finish. Use: This all-purpose latch is designed for right- or left-hand swinging or sliding door and gates. Feature(s):
|
 |
|
Cam-Action Jamb Latches (CALA) Packaging: Boxed with screws Material(s): Hot-rolled steel base; steel rod bar. Finish(es): Zinc plated finish. Use: This cam-action latch is designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It can also be used for end gates on stake trucks. |
 |
|
Heavy Safety Gate Hooks with Screw Eyes (HLLA) Packaging: Boxed with screws Material(s): Steel wire hook and hot-rolled steel plate staples. Finish(es): Zinc plated finish. Use: This heavy-duty safety hook is for gates, doors and other applications where positive latching is desired. |
 |
|
Slide-Mounted Door Guides (DOGU) Packaging: Boxed without fasteners Material(s): Galvanized steel Finish(es): Galvanized coating Use: These extra-wide guides are signed for metal-clad doors. Guides are adjustable for doors up to 5½" thick. Guide also can be used as a door stop when mounted sideways. Feature(s):
|
 |
|
Slide-Mounted Stay Rollers (STRO) Packaging: Boxed without screws Material(s): Galvanized steel with Delrin wheel Finish(es): Galvanized coating Use: Designed for use as a heavy-duty guide on large, sliding doors up to 3¾" thick. Feature(s):
|
 |
|
Side Rails (SR1) Packaging: Bundled with corrugated wrapper Material(s): Steel Finish(es): Baked-on white plastisol finish. Use: These self-flashing verticals are pre-punched for attaching 1½" thick wood horizontal members. Feature(s):
|
 |
| Lengths Available | ||||||||||
| 7' | 8' | 9' | 10' | 11' | 12' | 13' | 14' | 15' | 16' | 20' |
|
Door Astragals Packaging: Bundled with corrugated wrapper Material(s): Extruded aluminum Finish(es): Baked-on, powder-coat white finish. Use: Designed to cover the gap between bi-parting doors. The unique design allows it to wrap around the flashing channel of the vertical. Attaches with pop rivets. Feature(s):
|
 |
| Lengths Available | |||
| 10' | 12' | 14' | 16' |
|
Tab-Loc Steel Lateral (DL) Packaging: Loose Material(s): Hot-rolled steel Finish(es): Zinc plated Use: Door girts are pre-punched at each end for easy attachment to the Tab-Loc vertical members. All laterals have hanger holes pre-punched and can be used as either top, bottom or intermediate door girts. |
 |
| Lengths Available | |||||
| 8' | 10' | 12' | 14' | 16' | 20' |
|
Tab-Loc Steel Vertical (TL) Packaging: Loose Material(s): Hot-rolled steel Finish(es): White finish Use: Door covering slides into channel of vertical for smooth, clean fit. No flashing needed -- vertical provides a clean, finished edge. |
|
| Lengths Available | ||||||||||
| 7' | 8' | 9' | 10' | 11' | 12' | 13' | 14' | 15' | 16' | 20' |
|
Door Stop (DOST) Packaging: Loose Material(s): Hot-rolled steel Finish(es): Zinc plated Use: Heavy-duty adjustable door stop, for single or bi-parting doors. Can be used with 2½" or 3-1/8" thick doors. |
 |
|
By-Passing Door Guide (CGDCG) Packaging: Boxed Material(s): Galvanized steel Finish(es): Zinc plated finish Use: By-passing door guide is adjustable to maximum 3" door. |
 |
|
Single Continuous Door Guide Rail (CGS) Packaging: Loose without brackets Material(s): Galvanized steel Finish(es): Galvanized finish Use: These door guide rails hold the door in place and prevent wind damage. Fastens to building with the Guide Rail Bracket. |
 |
| Lengths Available | |
| 6' | 10' |
|
Door Guide Rail Bracket (GBR/N) Packaging: Boxed loose Material(s): Galvanized steel Finish(es): Galvanized coating Use: Designed for use with Single Continuous Door Guide Rail. Slotted hole is each leg allows for both lateral and vertical adjustments. |
 |
|
Double Interlocking Track Bracket (DILB) Packaging: Loose Use: Used to attach track cover. Can be utilized for double by-passing door systems. Also used for single studmount track door system. |
 |
|
Galvanized Vertical Door Rail (DR) Packaging: Loose Use: Designed for use on sliding doors or horse stalls. |
 |
| Lengths Available | |||
| 8' | 10' | 12' | 14' |
|
2" Lag Bolt (LBX2) |
 |
| Style | Size | Box Qty | |
|
Woodfast - ¼" Head Note: 1" used for sheeting & Tri-Pli®, to lumber purlin 1½" used for sheeting & Tri-Pli®, to lumber purlin |
9-16 x 1" 9-16 x 1½" *9-16 x 2" |
4,000 2,500 2,000 |
| Woodfast - ¼" Head (Stainless Steel) | *9-16 x 1" | 2,500 | |
|
Type "S" Woodfast - 5/16" Head Note: Used for sheeting & Tri-Pli®, to plywood |
14-10 x 1" *14-10 x 1½" |
2,500 2,000 |
|
|
Self Drilling/Self Tapping -- 5/16" Head Note: Used for sheeting & Tri-Pli®, to steel purlin |
12-14 x 1¼" | 2,500 |
| Lap Tek - 5/16" Head | 14 x 7/8" | 2,500 | |
|
Stitch - ¼" Head Note: Used for stitching metal to metal |
12-14 x ¾" | 4,000 |
|
Door Girt Screw - 5/16" Head Note: Used for stitching metal to metal |
8-14 x ¾" | 4,000 | |
| Note: Please contact us about availability of fasteners for any special requirements. | |||
| *Non-stock item - call for availability | |||
